How to Install Wing Stays on HM124 RC Boat

Quick answer

Install the BEZGAR Wing+ Wing Stay (90141) on your HM124 RC boat by first removing the old wing stay, then aligning the new part with the hull mounting points, securing it with the provided screws, and finally attaching the wing.

Step-by-Step Installation

1. Remove the old wing stay: Unscrew the existing wing stay from the hull using a Phillips screwdriver. Keep the screws if they are in good condition. Check that the old screws are not stripped; replace them if necessary.
2. Align the new wing stay: Position the Wing+ Wing Stay (90141) over the mounting holes on the hull. Ensure the stay is oriented correctly (the curved side faces the wing). A common mistake is installing the stay backward, which prevents the wing from sitting flat.
3. Secure the wing stay: Insert the screws and tighten them evenly. Do not overtighten, as this can crack the plastic hull or strip the threads. Use a hand screwdriver to feel when the screw is snug, then stop.
4. Attach the wing: Slide the wing onto the stay's mounting post. Secure it with the provided clip or screw (depending on your wing type). Ensure the wing is level left to right. If the wing wobbles, check that the stay is fully seated and the mounting post is clean.

Product Facts

• Wing+ Wing Stay(90141) for HM124: This is a genuine BEZGAR spare part designed for the HM124 RC car model, ensuring a perfect fit and reliable performance. Using the correct part avoids alignment issues and ensures the wing stays securely during operation.